Heat Sink Welding For Preventing Hot Cracking In Alloy 2195 Intersection Welds: A Feasibility Study
by Nasa Technical Reports Server (ntrs)
2021-01-25 15:56:26
Heat Sink Welding For Preventing Hot Cracking In Alloy 2195 Intersection Welds: A Feasibility Study
by Nasa Technical Reports Server (ntrs)
2021-01-25 15:56:26
Two concepts, stationary cooling and trailing cooling, were proposed to prevent weld intersection cracking. Finite element analysis was used to demonstrate the potential effectiveness of those two concepts. Both stationary and trailing heat sink setu...
Read more
Two concepts, stationary cooling and trailing cooling, were proposed to prevent weld intersection cracking. Finite element analysis was used to demonstrate the potential effectiveness of those two concepts. Both stationary and trailing heat sink setups were proposed for preventing intersection cracking. The cooling media could be liquid nitrogen, or pressured air knife. Welding experiments on the small test panel with the localized heat sink confirmed the feasibility of using such a stationary cooling technique. The required cooling was achieved in this test panel. Systematic welding experiments should be conducted in the future to validate and refine the heat sink technique for preventing intersection cracking.
Less
